Sanded the rest of the bottom and flipped* her. Got another gunwale on and the inner and outer gunwales on the transom. Also got a whole side of the inner seam filleted and glassed. I know already that I'll have to go back over it and do the epoxy thing on the stitchpoints a bit, but otherwise it looks good. Used a little different tape as well as a new mantra ("It's only a rowboat") and the fiberglassing job looks better already.Jill's dad is coming to town this weekend and I'm rushing to get as much done as possible in an effort to get her painted before he can see my shoddy glassing and sanding job. :) Actually I want to get the grunt work done so I can work on some of the detail stuff and show off with the scrollsaw.
I should get to work on those oars, too.
* When building a larger boat the transition from working on the hull (upside down boat) to working on the righted portion seems to be a big deal. And rightfully so. Often it's been a long, long time and a lot of hard work to finish the bottom of the boat. It's also one of those times when you have to call all your friends and get them to help you turn it over. So when you finally get it flipped not only have you worked really hard, but it's time for the fun building stuff to start.
1 comment:
Don't know if you learned this trick yet, but it changed my life: wet the glass tape out on a clean flat surface (I use a clean piece of poly) and then pick the tape up (roll it up if it's long) and move it into position. It's way faster and you will use less resin because it's easier to squeegee out the excess. It'll also be a much cleaner job. I've just been doing it for the last 6 hours.
Post a Comment