The ship launched with great success! She handled, floated, steered, and powered exactly as I had hoped. Huge relief! More story and video and pix later..
Jul 3, 2010
Jul 1, 2010
After You: Ready for Launch
A view almost as pretty as the boat herself -- a less than jam packed garage.
Trailer assembled and boat loaded. Took them on a road test tonight and they both performed on the road as hoped. We'll float her on Saturday up at Bear Lake.
Jun 25, 2010
Jun 22, 2010
Blister Camp 1 - 6/18/10 - 6/20/10
- Rode to Saint Croix Falls
- Rode Wisconsin "alphabet" roads for a day
- Feasted
- Camped
- Rode Home
- 350 miles from group start to loss of quorum.
- Tom, Uriah and I were the only campers, but it was great fun.
![]() | ![]() |
- PBR does not extinguish fire
- Coca-Cola does not extinguish fire, and spews scary thick liquids well after it dies
- Jack Daniels is the anti-extinguisher and makes scariness, but fun.
- "That's what she said" is actually a phrase used quite often in science. True fact.
- We can indeed scooter camp
- Now that we proved it, maybe next time we should have families bring our gear and hang out
- My Android phone (Nexus One) lived quite well! I charged it with a battery pack (only 50%) Saturday, but otherwise didn't plug it in all weekend. Used it for mapping, lookups, facebook posts, as a camera, and for the web to settle beer-based arguments and conundrums. Was wise about battery usage, but comfortably supplied with phone-goodness.
- Group camping sites are the way to go
- Not too buggy, not too cold. Could have been sunnier during the day
Jun 18, 2010
Gone, Gone, Gone
I am going scooter camping this weekend with a couple of scooter friends. We're going to have a lot of scooter fun and drive on some cool scooter roads, like the one shown above.Jun 16, 2010
Tuesday Night Ride
Jun 11, 2010
After You: Flipped!
Turned her upright, built the skylight and am rarin' to go on the rest of the interior! Still aiming for a July fourth launch date but I have a feeling I might dip her in a local lake first for a wet test. Really nice to get her looking like a boat and moving forward...
Lily is as helpful as ever, though between-coat sanding of paint is "really hard" and not likely to be in her future..
Jun 7, 2010
After You: Progress
Screws gently pushed into the surface hold the tape down while a corner is being epoxied. Once the tape settles, pop the screw out, drop another layer of epoxy on it all and it's nice and tight!
I've actually gotten this side covered in paint and I'm finishing up the striping so I can poly before we go out of town next. After that dries she'll be righted and I'll finish up the top and inside. Still hoping for a July 4th or so launch date.
Need to start researching rivers to wander a bit more seriously now. Initially I was all about the Namekagon and the Saint Croix, but I'm also looking more local, like the Minnesota, Cannon, etc.
Pretty much written off the Headwaters on down based on a single Rice Lake journey report. You can haul a canoe over marches and mud, but the After You is less portagable. Unless I come up with a portable portaging solution.. Hmmm . :)
Jun 3, 2010
After You: Port side!
Bottom and side done. Now on to the next side so I can get her upright. Sadly I'll be missing the Pepin messabout.
May 25, 2010
May 21, 2010
May 18, 2010
TNR
May 17, 2010
After You: PAINt
Everybody always says "just slap some porch paint on 'er and she's done!" in regards to my current class of shipbuilding. (By current class I mean midwestern dads kicking the midlife crisis in a rowboat built from supplies at Homer's or Ace. Not the nautical professional, not a true sailor, not a serious boatbuilder.) [no offense, anybody]
Well, being so much smarter than everyone else who's done this, I went to Menards and explained my very complicated paint needs to a minimum wage paint jockey. I was sold a wonderful industrial maintenance paint that went on like tar and looked like it was going to cure to be a sheet of slate on my boat, only slightly lighter. Two days later and it's still sticky, but I'm thinking "it's on epoxy, of course it'll take a bit longer." After a week plus I decided the wet paint wasn't going to get any dryer and sucked it up and started scraping. The fact that it was so easy to slip the paint off really did tell me I should have gone traditional long ago. So after a bunch of scraping, mineral spirits, washing, sanding, and prepping... I'm porch painted up on one side. I'll get another layer or two of paint on there and hopefully by the weekend I'll put a layer of transparent protection on there, give it a week to cure, and flip it for the other side.
I still have to do the whole chisel, mineral spirits and sanding on the bottom. Joy. All I'll have to do after that is the other side, the roof, the interior, the bunks... Sweet!
I did, however, cut a porthole frame and the Lexan to go in it and it went really well. I also sanded and painted the window frames and have come closer to understanding how I want to solve the "how to open a window" issue.







.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)

















.jpg)
.jpg)
.jpg)
